当前位置:

首 页 > 产品中心 > PHC-02D水浴氮吹仪

产品展示Products

PHC-02D水浴氮吹仪

型    号:PHC-02D
报    价: 市场价:
分享到:

PHC-02D水浴氮吹仪
PHC-01D水浴氮吹仪
型号:PHC-01D, PHC-02D, PHC-11D, PHC-12D
温控范围:室温+5℃~100℃
温控调节精度:0.1℃
温控精度:1℃
压力调节:0~0.25Mpa 【“1"系列】
控温方式:数字显示, PID调节,过热保护
加热孔数:12孔或24孔

PHC-02D水浴氮吹仪产品概述:

PHC-02D水浴氮吹仪
型号:PHC-01D, PHC-02D, PHC-11D, PHC-12D
温控范围:室温+5℃~100℃
温控调节精度:0.1℃
温控精度:1℃
压力调节:0~0.25Mpa 【“1"系列】
控温方式:数字显示, PID调节,过热保护
加热孔数:12孔或24孔
 

主要特点

 

1. 每个气道都可同时或独立控制,升降高度可根据试管高度自由调节。
Every air passage is capable of operating simultaneously or independently. The users can adjust freely according to the height of tube.
2. 选取智能温控器,数字显示,PID调节,干式加热温控范围从室温+5~150℃,水浴加热温控范围从室温+5~100℃,*实验需要,且设有上限温度报警功能,使操作更加安全。
Choose inligence temperature controller with a digital display, PID control, the range of temperature is from ambient+5℃ to 150℃(dry bath) and ambient+5℃ to 100℃(water). it is able to fulfill experiment requirement. Built-in heat-triggered protector can make the operation more securely.
3. 经过表面氧化处理的加热块或不锈钢支架(水浴)清洁美观,使用寿命更长,可根据要求定制不同孔径模块,满足使用者需求。
Anodized aluminum heating blocks or stainless steel brackets are clean and beautiful, extending using life. We can offer different size holes of the block according the demand.
4. *的压力显示使气源的流量控制更加直观,方便流量大小的调节,减少了不必要的气体损耗,节约成本。(此功能仅适用于型号为11D,12D,13D的氮吹仪)
The unique design of the pressure gauge can control the flowing more directly, readuce waste and save the cost effectively.( It is only suitable for mode 11D, 12D, 13D)
5. 新品可调型氮吹仪克服了以往氮吹仪中氮气流量不均而导致样品不能同时吹干的缺点,每路都配有流量调节装置,使流量的控制更加简便。(此功能仅适用于型号为21D,22D的氮吹仪)
The new adjustable Pressured gas blowing concentrators overcome the handicap causes by poor distribution of the nitrogen flow that results it can not blowing the samples at the same time.Every passage has a valve that regulates the flow of a fluid, it make the adjustment more convenient. ( It is only suitable for mode 21D, 22D)
6.如有特殊需求可来电定制。
Please call us if you have special need.

产品相关关键字: PHC-02D水浴氮吹仪 氮吹仪

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7